Brocade Communications Systems 815 Manual De Usuario

debug

B

debug 

The debug commands gather support information on Fibre Channel components.

Synopsis

bcu debug --portlog <port_id> 

bcu debug --portlogclear <port_id>

bcu debug --portlogctl <port_id> <enable | disable> 

bcu debug does not support the bcu debug --supportsave command. bfa_supportsave, however, 
supports the following options:

•

bfa_supportsave
to create and save the supportsave at /tmp

•

bfa_supportsave_dir
to create and save the supportsave under <dir>

•

bfa_supportsave <dir> <ss_file_name>
to create and save the supportsave under <dir> as the file name <ss_file_name>. If 
<ss_file_name> already exists, it will be overwritten.

Description

Captures all the support information needed to diagnose suspected system issues. 

Operands

--portlog

Displays the log of FC frames and other main control messages that were 
sent out and received.

If the port log is disabled, the following message displays as the first line: 
Refer to the portlogctl command for more information: WARNING: port log is 
disabled.

Specifies the ID of the port for which you want to display the FC frame logs 
and other control messages.

--portlogclear

Clears the port’s frame log.

Specifies the ID of the port for which you want to clear the port’s frame log.

--portlogctl

Enables or disables the portlog.

Specifies the ID of the port for which you want to enable or disable the 
portlog.

Enables the portlogclear command.

Disables the portlogclear command.