Black Box 34336 Manual De Usuario

The CD to EIA option is available for Hayes, V.25 bis, and Dumb modes.

• NORMAL — Carrier Detect (CD) is on while the modem is on-line.

• TRUE — CD follows DTR supplied from the DTE.

• TOGGLE — CD turns on whenever DTR is present and then toggles

off for 500 ms upon disconnect, allowing the attached DTE to
recognize that the call is ended and the connection is dropped.

The DSR to EIA option is available for Hayes, V.25 bis, and Dumb modes.

• NORMAL — Data Set Ready (DSR) is on while the modem is on-line.

• TRUE — DSR follows DTR supplied from the DTE.

• CROSSOVER (XOVER) — DSR is ON without DTR and toggles for

500 ms upon local or remote disconnect.

The DTR from EIA is available for all modes. It allows you to force the Data
Terminal Ready (DTR) signal on (TRUE), which may be needed if your
computer or communication software does not supply a DTR signal.

• NORMAL — DTR is supplied by the DTE.

• TRUE — The DTR signal is internally forced ON regardless of the DTR

status at the interface.

The DTE Control Of ALB (ALB- DTE Ctrl’ed) option is available for all
modes.  Analog loopback (ALB) testing can be initiated from the DTE via
pin 18. Positive voltage activates the test, whereas negative voltage results in
normal operation. Disabling this option keeps the modem from responding
to pin 18.

The DTE Control Of RDL (RDL- DTE Ctrl’ed) option is available for all
modes. Remote digital loopback (RDL) can be initiated from the DTE via
pin 21. Positive voltage activates the test, whereas negative voltage results in
normal operation.  Disabling this option keeps the modem from responding
to pin 21.