Cisco Systems ata 186 Manual De Usuario
3-12
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide for MGCP (version 3.0)
OL-4803-01
Chapter 3 Configuring the Cisco ATA for MGCP
Configuring the Cisco ATA Using a TFTP Server
The following command and output show an example of this command.
Command Example
atapname.exe 10.20.30.40.50.60
Command Output
ata0a141e28323c
Note
The same functionality is available from the voice configuration menu (voice menu code 84#), which
will announce the Cisco ATA profile name.
will announce the Cisco ATA profile name.
Using Encryption With the cfgfmt Tool
The EncryptKey or EncryptKeyEx parameter can be used to encrypt binary files that are transferred over
TFTP. You can change encryption keys for each Cisco ATA so that only one specific Cisco ATA can
decode the information.
TFTP. You can change encryption keys for each Cisco ATA so that only one specific Cisco ATA can
decode the information.
Cisco strongly recommends using the EncryptKeyEx parameter for encryption because this parameter
provides a stronger encryption than the EncryptKey parameter that was used in Cisco ATA software
releases prior to release 2.16.
provides a stronger encryption than the EncryptKey parameter that was used in Cisco ATA software
releases prior to release 2.16.
You must use version 2.3 of the cfgfmt configuration-file generation tool to use the new EncryptKeyEx
parameter. This tools comes bundled with Cisco ATA software version 3.0. To verify that you have
version 2.3 of the cfgfmt tool type the following command:
parameter. This tools comes bundled with Cisco ATA software version 3.0. To verify that you have
version 2.3 of the cfgfmt tool type the following command:
cfgfmt
The version number of the cfgfmt tool will be returned.
You can configure the EncryptKeyEx parameter by using the Cisco ATA Web configuration page or by
using the TFTP configuration method. (For more information, see the
using the TFTP configuration method. (For more information, see the
You can configure the EncryptKey parameter by using the Cisco ATA Web configuration page, the
voice configuration menu, or by using the TFTP configuration method. (For more information, see the
voice configuration menu, or by using the TFTP configuration method. (For more information, see the
.)
By default, the Cisco ATA-specific ata<macaddress> configuration file(s) are not encrypted. If
encryption is required, however, you must manually configure the EncryptKeyEx or EncryptKey
parameter before you boot up the Cisco ATA so that the TFTP method is secure. The Cisco ATA uses the
RC4 cipher algorithm for encryption.
encryption is required, however, you must manually configure the EncryptKeyEx or EncryptKey
parameter before you boot up the Cisco ATA so that the TFTP method is secure. The Cisco ATA uses the
RC4 cipher algorithm for encryption.
Note
Because the factory-fresh ATA cannot accept encrypted configuration files, the first unencrypted file, if
intercepted, can easily be read. (You would still have to know the data structure format in order to decode
the binary information from the unencrypted file.) Therefore, the new encryption key in the unencrypted
file can be compromised.
intercepted, can easily be read. (You would still have to know the data structure format in order to decode
the binary information from the unencrypted file.) Therefore, the new encryption key in the unencrypted
file can be compromised.
Note
For security reasons, Cisco recommends that you set the UIPassword parameter (if desired) in the
configuration file and not by using one of the manual configuration methods.
configuration file and not by using one of the manual configuration methods.