Cisco Systems 100/200/300/400 Manual De Usuario
C H A P T E R
4-1
Cisco Content Delivery Engine 100/200/300/400 Hardware Installation Guide
OL-13478-03
4
Installing the Internet Streamer CDS Software
and Initially Configuring a CDE
and Initially Configuring a CDE
This chapter describes the initial installation of the Cisco Internet Streamer CDS Release 2.0-2.1
software application suite, and the initial configuration of the CDE. This chapter contains the following
sections:
software application suite, and the initial configuration of the CDE. This chapter contains the following
sections:
•
•
•
•
•
Before You Begin
You need the following to perform the initial installation and configuration of the CDS:
•
CDE100 or CDE200
•
USB CD-ROM drive (for CDE200 only [provided])
•
Internal IDE compact flash drive (pre-installed)
•
Terminal server connection with the following parameters:
–
9600 baud
–
8 bits
–
No parity
–
Redirection After BIOS POST is off in CDE BIOS setup
–
Console redirection enabled for COM1
•
CDS image CD
•
Network connection
Note
On the CDE200, use the USB port to connect the USB CD-ROM drive. After the initial installation,
remove the USB CD-ROM drive. The internal IDE compact flash drive becomes the boot drive for
subsequent operations.
remove the USB CD-ROM drive. The internal IDE compact flash drive becomes the boot drive for
subsequent operations.