Cisco Systems 1010 Manual De Usuario
Cabling and Configuring the CES Port Adapter Modules 8-3
Overview of the CES Port Adapter Modules
Table 8-1
USOC Jacks for CES Port Adapter Modules
Overview of the CES Port Adapter Modules
The circuit emulation service (CES) T1 and E1 Port Adapter Modules (see Figure 8-1) are
ideal for links that require constant bit rate (CBR) services such as interconnecting PBXs,
time-division multiplexers, and video conference equipment over campus, public, or
private networks. The four ports on the PAM can be configured as redundant links using the
switch's routing protocols. The T1 PAMs support UTP connectors and the E1 PAMs
support either twisted-pair, STP, or 75-ohm BNC connectors. Status and carrier detect
LEDs on each port give quick, visual indications of port status and operation. For detailed
network management support, comprehensive statistics gathering and alarm monitoring
capabilities are provided.
ideal for links that require constant bit rate (CBR) services such as interconnecting PBXs,
time-division multiplexers, and video conference equipment over campus, public, or
private networks. The four ports on the PAM can be configured as redundant links using the
switch's routing protocols. The T1 PAMs support UTP connectors and the E1 PAMs
support either twisted-pair, STP, or 75-ohm BNC connectors. Status and carrier detect
LEDs on each port give quick, visual indications of port status and operation. For detailed
network management support, comprehensive statistics gathering and alarm monitoring
capabilities are provided.
Model Name
Facility
Interface Code
Interface Code
Service Order
Code
Code
Jack Type
WAI-T1C-4RJ48
04DU9-BN
6.0N
N/A
WAI-T1C-4RJ48
04DU9-DN
6.0N
N/A
WAI-T1C-4RJ48
04DU9-1KN
6.0N
N/A
WAI-T1C-4RJ48
04DU9-1SN
6.0N
N/A
WAI-T1C-4RJ48
04DU9-1ZN
6.0N
N/A