Cables to Go 8 Manual De Usuario

 

 

 

This diagram will help you get the MultiMix 8 USB hooked up and 

ready to go. The equipment you use depends on personal 

preference and on whether you’re performing live or recording. 

For example, you’ll see below that the MAIN MIX OUT can be 

routed to a recording device for recording, or to a PA system for 

live performance.  

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

When connecting instruments and other equipment to the 

MultiMix, it’s important that you use the appropriate types of  

cables. Here are some simple but important guidelines: 

 

y 

For the mic inputs, use XLR cables. 

y 

For the line inputs and all other 1/4” connections, use 1/4” 

mono TRS cables. 

y 

Use stereo RCA cables for the 2-track in and out. 

 

y 

Use a USB cable to connect the USB port to a computer.  Do 

not use a USB hub, as hubs can introduce timing glitches in 

USB communication. 

 
 

 

Before you can begin mixing different audio sources with your 

MultiMix, you must set the level for each channel you’re using. 

This helps to prevent distortion and clipping. The idea is to get the 

strongest signal possible without clipping. Here’s how: 

 
1.  Turn the channel level control to the 12:00 position. 
2.  Turn the AUX SEND and GAIN controls all the way down, 

and turn the EQ knobs to the center detent (you’ll feel a click). 

 

3.  Connect the source of  the signal to the channel’s input. 

 

4.  Play the instrument at a normal level and adjust the channel’s 

gain slowly until the PEAK LED lights. 

 

5.  Slowly reduce the channel’s gain until the PEAK LED no 

longer lights when you play. 

 

6.  If  you need to apply EQ, do so and check the PEAK LED to 

make sure it still does not light as you play.