Cables to Go 8 Manual De Usuario

 

When you engage this switch, the signal coming in from the 2-

TRACK jacks is routed to the headphones and to the control 

room output. This level is controlled by the HDPH / CTRL 

ROOM level control and cancels out any signal from the main mix. 

 

 

This is the level control for the signal returning to the mixer via 

AUX RETURN A. 

 

 

If  you are using one of  the MultiMix 8 USB’s internal effects, this 

knob controls the effect level. If  AUX SEND B is connected to an 

external device, this knob controls the level for AUX RETURN B. 

 

 

These are the two rows of  yellow, green and red lights you see in 

the master section of  the mixer. The LED meters allow you to 

view the signal level of  the main mix and 2-TRACK IN depending 

on which signal you have routed to the control room mix. 

 

 

When this LED is lit up, that means the POWER ON switch on 

the rear of  the mixer has been activated. 

 

 

When this one is lit up, that means the PHANTOM ON switch on 

the rear of  the mixer has been activated and is supplying +48V 

phantom power to all XLR mic inputs. 

 

 

 

 

Here’s what you’ll find at the rear of  the mixer. 

 

 

 

 

 

 

 

 

 

 
 

 

 

Here’s where you plug in your mixer’s external power supply. 

You should always connect your power supply to the mixer before 

you plug the power supply into an electrical outlet.  

 

 

This unit provides 18.5 VAC at 700 mA, more than enough to 

keep your MultiMix 8 USB running smoothly. As with nearly all 

power supply units, this one tends to get warm when left on for a 

while. This is perfectly normal. 

 

 

Another easy one. Switch this one on and your mixer has power. 

Switch it off  and it doesn’t. Make sure that all master output knobs 

are turned all the way down when powering your mixer up or 

down.

 

 

 

This switch activates and deactivates the phantom power 

described in “Mic Inputs (Channels 1 – 4),” page 9. This switch 

controls phantom power for all four mic inputs. 

 

 

 

 

This port allows you to connect the Multimix to a computer for 2-

way, stereo digital audio communication.