Billion Electric Company 30 Manual De Usuario

 

 

90

 

 
Mode: You can select Load Balance or Fail Over. 
Service Detection: Enables or disables the service detection feature. For fail over, 
the service detection function is enabled. For load balance, user is able to enable or 
disable it. 
Connectivity Decision: Establishes the number of times probing the connection has 
to fail before the connection is judged as failed. 
Probe Cycle: The number of seconds between each probe. 
Probe WAN1: Determines if WAN1 is a gateway or host. If host is selected, please 
enter the IP address. 
Probe WAN2: Determines if WAN2 is a gateway or host. If host is selected, please 
enter the IP address. 
Fail back to WAN1 when possible: Enables or disables fail back to WAN1. This 
function only applies to fail over. 
 
Click Apply to save your changes.