Siemens CP 1515 Manual De Usuario
5HERRWLQJ5/0V
Industrial Ethernet Wireless LAN RLM Manager, CP 1515 Manager
C79000-G8976-C171-01
C79000-G8976-C171-01
241
% 5HERRWLQJ5/0V
If a particular Radio Link Module has stopped responding to normal bridging
requests, you can reboot (reset) the Access Point RLM. You can reboot
RLMs either manually on-the-spot or remotely.
requests, you can reboot (reset) the Access Point RLM. You can reboot
RLMs either manually on-the-spot or remotely.
Upon reboot, the Radio Link Module will run the start-up diagnostics and
start bridging operation using the configuration parameters as they were
stored in the RLM prior to the reboot. For “out-of-the-box” RLMs, these
parameters will be as identified in
start bridging operation using the configuration parameters as they were
stored in the RLM prior to the reboot. For “out-of-the-box” RLMs, these
parameters will be as identified in
% 0DQXDO5HERRW
To reboot the RLM manually on-the-spot proceed as follows:
1.
Remove the cover of the Radio Link Module (see the Manual “Industrial
Ethernet Wireless LAN, Radio Link Module RLM” on IWL-CD that came
with your RLM, for assistance if needed).
Ethernet Wireless LAN, Radio Link Module RLM” on IWL-CD that came
with your RLM, for assistance if needed).
2. Locate the two small holes on the bottom of the processor module,
marked “Reset” and “Reload” as pictured in
.