Siemens NCM S7 Manual De Usuario

111

SIMATIC NET NCM S7 for Industrial Ethernet
Release 6/2003

C79000–G8976–C129–07

The Overview tab displays all previously configured ISO transport connections and
their parameters for this station (information only).

For an example of this display, refer to Section 4.3.4.

Local ID

S7 Station: This is the connection ID of the ISO transport connection;

PC Station: Identification number for the connection.

Name

Name entered for the connection endpoint.

CPU / Applications

If you display all the ISO transport connections being operated in this station
in the multiprocessor mode (with PC stations: multiple applications), the
CPU/application that is the endpoint of the particular connection is specified
here.

R/S or via CP

With S7-CPs: Rack/slot of the local CP via which the connection is
established.

With PC stations: Display of the CP over which the connection is
maintained.

Remote 
address

Specifies the remote MAC address of the connection on the Ethernet
subnet.

Local TSAP

Transport Service Access Point for the local connection endpoint.

Partner TSAP

Transport Service Access Point for the remote connection endpoint.

Mode

Displays the mode configured in the ”Options” tab.

Status

Indicates the current configuration of the connection. 
“Connections without assignment” are indicated by “No local CP/No remote
CP” in the status column and a “!” character at the end of the“Local ID” (for
example: 0002 A000!). 
Connections you are currently editing are also indicated by “!” at the end of
the local ID.

You can set the column widths in the “Overview” tab individually.

If you operate more than one CPU in your S7 station, you can click the button to
extend the overview to the connections on all CPUs.