Siemens NCM S7 Manual De Usuario
Programmed Communication Connections
156
SIMATIC NET NCM S7 for Industrial Ethernet
Release 6/2003
C79000–G8976–C129–07
5.5.4
Parameter Field for an E-Mail Connection
Meaning
To send E-mails, you must always set up one E-mail connection per IT-CP. The
E-mail connection specifies the mail server, over which all the E-mails sent by the
IT-CP are delivered.
E-mail connection specifies the mail server, over which all the E-mails sent by the
IT-CP are delivered.
You will find a detailed description of how to use the E-mail function with IT-CPs in
/5/.
/5/.
Structure
Subfield 1
Subfield n
Subfield 2
ID = connection ID
Type = 4
No_of_subfields = n
Freely assignable connection reference;
must be specified in AG_SEND.
must be specified in AG_SEND.
Range of values for the connection ID:
S
S7-400: 1,2 through 64
S
S7-300: 1,2 through 16
Identifier for the connection type
Usable Subfields
Table 5-5
Subfield
Parameter
ID
Type
*)
Special Features / Notes
(Please refer also to the general
description in Table 5-7 Page 159)
Use
( mandatory
/ optional)
1
SUB_IP_V4
IP address of the mail server, over which
the E-mails are sent.
the E-mails are sent.
The IP address can be specified in
absolute or symbolic form.
absolute or symbolic form.
The symbolic form assumes that the IT-CP
knows the address of the domain name
server (DNS). This must be entered during
configuration of the IT-CP in HW Config, for
more detailed information, refer to the
online help of HW Config.
knows the address of the domain name
server (DNS). This must be entered during
configuration of the IT-CP in HW Config, for
more detailed information, refer to the
online help of HW Config.
m / o
**)
3
SUB_DNS_NAME
DNS name of the E-mail server
m / o
**)
13
SUB_EMAIL_SENDER
E-mail address of the sender
m
18
SUB_CONNECT_NAME
–
o