Siemens NCM S7 Manual De Usuario
NCM S7 Diagnostics
218
SIMATIC NET NCM S7 for Industrial Ethernet
Release 6/2003
C79000–G8976–C129–07
7.3.6
Other Ways of Starting Diagnostics
Starting in the properties dialog of the connections:
1. Select the PLC
"
Activate Connection Status menu command to activate
online access.
2. Select the “Special Diagnostics” button in the “Status Information” tab.
Starting in the hardware configuration tool HW Config:
1. With the S7 station online, select the PLC
"
Module Status menu command;
2. Select the “Special Diagnostics” button in the dialog that is opened.
Note
To operate several diagnostic connections at the same time, you can start NCM
S7 Diagnostics more than once.
S7 Diagnostics more than once.
You can also start NCM S7 Diagnostics twice with an online connection to the
same CP; this can, for example, be useful if you want to monitor the diagnostic
buffer at the same time as running diagnostic functions on a connection.
same CP; this can, for example, be useful if you want to monitor the diagnostic
buffer at the same time as running diagnostic functions on a connection.
Requirement: You have an online connection available via the LAN (ISO or
TCP/IP) on the one hand and an online connection via the communication (K) bus
on the other (alternatively via the CPU or via PG channel routing via a further CP).
TCP/IP) on the one hand and an online connection via the communication (K) bus
on the other (alternatively via the CPU or via PG channel routing via a further CP).