Siemens NCM S7 Manual De Usuario
Installing and Starting the Ethernet CP with STEP 7
57
SIMATIC NET NCM S7 for Industrial Ethernet
Release 6/2003
Release 6/2003
C79000–G8976–C129–07
2.2.4
Setting Further CP Properties
Overview
In addition to the network attachment, you can also make further settings for the
specific module or you can call functions.
specific module or you can call functions.
1. Select the Ethernet CP in the hardware configuration.
2. Select Edit
"
Object Properties. Depending on your type of CP, the dialog
includes other tabs in addition to the “General” tab described in Section 2.2.2:
Tabs
Settings for
General
Interface
Addresses
Interface parameters for the user
program
program
Options
Time-of-day synchronization
Data transfer
Replace module without PG
Ethernet profile for fault-tolerant connections
Individual network settings
Send keepalives for connections
Multiplex OP connections / reserve internal CPU
connection resources
connection resources
Time-of-Day Synchronization
SIMATIC mode
NTP mode (NTP: Network Time Protocol)
User
Specify user permissions for IT functions
Symbols
Symbolic access to variables using IT
functions
functions
DNS parameters
Specify the address for the domain name
server for E-mail services
server for E-mail services
Diagnostics
Call NCM diagnostics (special diagnostics /
module diagnostics)
module diagnostics)
Addressing
Select the station to initialize
Assign configured IP parameters
IP Access Protection
Edit the IP access list
IP Configuration
Set the IP address
Please read the description of the Properties dialog of the CP in the integrated
help. The functions are explained in detail there.
help. The functions are explained in detail there.
F1