Siemens NCM S7 Manual De Usuario

87

SIMATIC NET NCM S7 for Industrial Ethernet
Release 6/2003

C79000–G8976–C129–07

This chapter explains the following:

S

The general aspects of configuring communication connections

S

How to configure ISO transport connections, ISO-on-TCP and TCP connections

S

How to use the connection configuration functions to specify communication
partners that exchange data via UDP

You will find a description of the connection-specific properties dialogs in the
following sections:

S

ISO transport connections see Section 4.4

S

ISO-on-TCP connections see Section 4.5

S

TCP connections see Section 4.6

S

UDP see Section 4.7

You will find further information in the following sources:

S

For the properties of the configurable connection types, refer to Section 1.5

S

There are situations in which communication connections are not set up over
the configuration interface of STEP 7 but program-controlled by certain
applications; see also Chapter 5.

S

For the properties of the configurable connection type E-mail, refer to /5/.

S

You will find information on the numbers of connections and amounts of data in
Section 3.1.

S

For information on configuring connections, refer to the online help of STEP 7
by selecting Help 

"