Siemens 9340-60-ETHER Manual De Usuario
ACCESS 9340 and 9360 Meter Ethernet Communications Card
PMCM-ETHCC-0208
Accessing the 9340-60-ETHER module Over a Network
2/2008
© 2008 Siemens Energy & Automation, Inc.. All Rights
4
ENGLISH
ACCESSING THE 9340-60-ETHER
MODULE OVER A NETWORK
MODULE OVER A NETWORK
After you set up the Ethernet parameters (see the installation guide
PMIM-ETHCC-0208), you can access the 9340-60-ETHER module over an
Ethernet LAN using Internet Explorer 6.0 or higher.
PMIM-ETHCC-0208), you can access the 9340-60-ETHER module over an
Ethernet LAN using Internet Explorer 6.0 or higher.
Logging into the 9340-60-ETHER
module
module
Logging Out
We recommend logging out whenever you do not need access to the
9340-60-ETHER module.
9340-60-ETHER module.
To log out of the configuration session, click Log Out to end your session.
Action
Result
1. Launch Internet Explorer 6.0 or higher.
Opens Internet Explorer.
2. Type the 9340-60-ETHER module’s IP
address that was entered into the meter,
then press Enter. To view the IP address
using the meter display, press MAINT >
SETUP > COMMS > ETHER.
then press Enter. To view the IP address
using the meter display, press MAINT >
SETUP > COMMS > ETHER.
Opens the Login dialog box.
3. Type your user name (Administrator is the
default) and password (Gateway is the
default) into the text boxes, then click OK.
default) into the text boxes, then click OK.
Enters the user name and password, then
opens the 9340-60-ETHER module home
page.
opens the 9340-60-ETHER module home
page.
Figure 1:
The Home Page
Menu bar