PioneerPOS G24-LC Manual De Usuario

In PDU mode: (+CMGF=0):

The following table shows the +CDS parameters.

After sending a +CDS unsolicited response to the TE, the G24-L will expect a +CNMA (new 
message acknowledgement) from the TE within a predefined timeout of 60 seconds. The G24-L 
will not send another +CDS unsolicited response to the TE before the previous one is 
acknowledged. If the +CDS is acknowledged within the timeout, the new SM is not saved in the 
message storage. If the +CDS is not acknowledged and the timeout has expired, the new SM is 
saved in the message storage and +CNMI parameter <ds> is set to ’0’.

These commands display a list of all SMs with the status value <stat>, from the G24-L message 
storage <mem1> (selected using the +CPMS command). The command returns a series of 
responses, one per message, each containing the message index, status, and data. If the status of a 

First octet of the SM

Message Reference

Message Recipient address

Type of Recipient address

Service center time stamp

Discharge-Time

Status