PioneerPOS G24-LC Manual De Usuario

This command determines the local serial port start/stop (asynchronous) character framing used 
by the DCE when accepting DTE commands and transmitting information text and result codes, 
whenever these are not done automatically. Auto detect framing is not supported.

The following table shows the +ICF parameters.

The Set command determines the local 
serial port start/stop character framing.

The Read command displays the 
currently selected character framing.

The Test command displays a list of 
supported <format> and <parity> 
values.

Determines the number of bits in the data bits, the presence (or absence) of a parity 
bit, and the number of stop bits in the start/stop frame.
1

8 Data, 2 Stop - can be set only with <parity> 4

2

8 Data, 1 Parity, 1 Stop - can be set with <parity> of  0 or 1

3

8 Data, 1 Stop (default) - can be set only with <parity> 4

4

7 Data, 2 Stop - can be set only with <parity> 4

5

7 Data, 1 Parity, 1 Stop - can be set with <parity> of  0 or 1

6

7 Data, 1 Stop - can be set only with <parity> 4

7

8 Data, 1 Parity, 2 Stop - can be set with <parity> of  0 or 1

8

7 Data, 1 Parity, 2 Stop - can be set with <parity> of  0 or 1

Determines how the parity bit is generated and checked (if present).
0

Odd

1

Even

4

No parity (default)