PioneerPOS G24-LC Manual De Usuario
Audio
3-176
G24-L AT Commands Reference Manual
April 15, 2008
+VTS, Command-Specific Tone Duration
This command transmits a string of DTMF tones when a voice call is active. DTMF tones may be
used, for example, when announcing the start of a recording period.
used, for example, when announcing the start of a recording period.
The duration does not erase the VTD duration (Refer to
Note:
In GSM, the tone duration value can be modified depending on the specific network.
If the active call is dropped in the middle of playing a DTMF tone, the following
unsolicited message transfers to TE: +VTS: "Call termination stopped DTMF tones
transmission".
unsolicited message transfers to TE: +VTS: "Call termination stopped DTMF tones
transmission".
The following table shows the +VTS parameters.
Note:
The duration defined by +VTS is specific to the DTMF string in this command only. It
does not erase the duration defined by the +VTD command, and is erased when the G24-L
is powered down.
does not erase the duration defined by the +VTD command, and is erased when the G24-L
is powered down.
If <duration> is not defined, the +VTD value is used.
Example
AT+VTS ?
+VTS: "5"
OK
AT+VTS="2",10
OK
Command
Type
Syntax
Response/Action
Remarks
Set
+VTS=
<DTMF>,[<duration>]
OK
+CME ERROR: <err>
The Set command sets the tone and
duration (if entered).
duration (if entered).
Read
+VTS?
+VTS: <DTMF>
+CME ERROR: <err>
The Read command displays the
currently transmitted DTMF tone. An
error is displayed if no tone is active.
currently transmitted DTMF tone. An
error is displayed if no tone is active.
Test
+VTS=?
+VTS: (list of
supported <DTMF>,
(list of supported
<durations>s)
(list of supported
<durations>s)
+CME ERROR: <err>
The Test command displays the list of
supported DTMF tones and tone
lengths.
supported DTMF tones and tone
lengths.
Table 3-118: +VTS Parameters
<Parameter>
Description
<DTMF>
String of ASCII characters (0-9, #, *, A-D)
String length is up to 32 characters long.
String length is up to 32 characters long.
<duration>
A DTMF tone of different duration from that set by the +VTD command.
0-600
0-600
Multiples of 100 msec (0 is equivalent to 1, that is, 100 msec)
<duration> does not erase the +VTD duration.