PioneerPOS G24-LC Manual De Usuario
Chapter 3: AT Commands Reference
April 15, 2008
G24-L AT Commands Reference Manual
3-227
AT+CLAN="DE"
OK
AT+CLAN?
+CLAN: "DE"
OK
+CIND, Indicator Control
This command is used to query the status of various ME indicators.
The following table shows the +CIND parameters.
Command
Type
Syntax
Response/Action
Remarks
Read
AT+CIND?
+CIND:<ind>,<ind>….
Read command returns the
status of ME indicators.
status of ME indicators.
Test
AT+CIND=?
+CIND :(<descr>,(list of supported
<ind>s)) ,(<descr>,(list of
supported<ind>s))…
supported<ind>s))…
Test command returns pairs,
where string value <descr> is
a short description of the indi-
cator and compound value is
the allowed values for the
indicator.
where string value <descr> is
a short description of the indi-
cator and compound value is
the allowed values for the
indicator.
Table 3-150: +CIND Parameters
<Parameter>
Description
<service>
0
Service not available.
1
Service available.
<call>
0
No call in progress.
1
Call in progress.
<recsms>
0
No unread messages.
1
Unread messages exist.
<roam>
0
ME is camped on a home network.
1
ME is roaming on home network.
2
ME is roaming on other network.
<signal>
0
ME has no service.
1
ME has 1 bar of signal strength.
2
ME has 2 bars of signal strength.
3
ME has 3 bars of signal strength.
4
ME has 4 bars of signal strength.
5
ME has 5 bars of signal strength.
<simav>
0
No SIM card available.
1
SIM card is inserted.
<smsfull>
0
SMS storage is not full.
1
SMS storage is full.