PioneerPOS G24-LC Manual De Usuario
GPRS
3-276
G24-L AT Commands Reference Manual
April 15, 2008
+MTKP: 1,0,"! YOUR RECHARGE OF TSH: 250.00 TO 0756706666 IS SUCCESSFUL"
AT+MTKA
// No other message should be display until this command sent.
+MTKP: 1,0,"Transaction successful!"
AT+MTKA
// No other message should be display until this command sent.
+MTKM: "VodaFASTA"
+MTKM: 96,5,Recharge,0
+MTKM: 97,5,Transfer,0
+MTKM: 98,5,Report,0
+MTKM: 99,5,Administration,0
+MTKM: 100,5,Exit,0
…
TCP/IP
+MIPCALL, Create a Wireless Link
This command sets up a PPP (Point to Point Protocol) connection with the GGSN (Gate GPRS
Support Node), and returns a valid dynamic IP for the G24-L.
Support Node), and returns a valid dynamic IP for the G24-L.
Note:
The DCD line changes only to reflect the state change from command mode to data mode.
Note:
The +MIPCALL command does not return the prompt to the terminal until the IP is
received from the provider, or time out has occurred, therefore, no other commands can
be issued in the meantime.
received from the provider, or time out has occurred, therefore, no other commands can
be issued in the meantime.
The +MIPCALL command does not have a general ABORT mechanism, therefore a
command cannot be issued until the previous command ends.
command cannot be issued until the previous command ends.
Note:
When a call exists the dynamic IP address will be returned.
For example:
For example:
AT+MIPCALL?
+MIPCALL: 1,"172.17.237.80"
Command Type
Syntax
Response/Action
Set
+MIPCALL= <Operation> [<APN>,
[<User name>, <Password>]]
OK
+MIPCALL: <"local IP address">
or:
ERROR: <err>
+MIPCALL: <"local IP address">
or:
ERROR: <err>
+MIPCALL: 0
Read
+MIPCALL?
+MIPCALL: <status>[,<IP>]
Test
+MIPCALL=?
+MIPCALL: (list of supported
<operation>s)