PioneerPOS G24-LC Manual De Usuario
Chapter 4: Using the Commands
April 15, 2008
G24-L AT Commands Reference Manual
4-29
TCP/IP
TCP Data Transfer Example
AT+MIPCALL=1,"orange","test","test"
OK
+MIPCALL: 172.17.242.86
AT+MIPOPEN=1,1222,"123.245.213.012",1234,0 //Opening socket 1 using TCP protocol, from port 1222,
targeting 123.245.213.012 port 1234
targeting 123.245.213.012 port 1234
OK
+MIPOPEN: 1,1
AT+MIPOPEN?
//Terminal checking the status of socket to be opened (socket 1 opened
OK)
+MIPOPEN: 2 3 4
+MIPSETS=1,340
//Asking the G24-L to accumulate 340 bytes on socket 1 prior to
sending
+MIPSETS: 0
OK
AT+MIPSETS?
+MIPSETS: 1 340
OK
AT+MIPSEND=1,"444444"
//Sent coded "DDD" string
+MIPSEND: 1,1497
//Free storage in the accumulating buffer
OK
Note:
This step can be repeated several times until the buffer is full or until the amount of data
reaches 340 bytes and data pushed into the stack.
reaches 340 bytes and data pushed into the stack.
AT+MIPSEND?
//Checking the size remaining (optional)
+MIPSEND: 1 1497
OK
+MIPPUSH=1
//Terminal asks G24-L to flush the buffer in socket 1
+MIPPUSH: 0
+MIPCLOSE=1
//Terminal closes the socket
+MIPCLOSE: 1
OK
+MIPCALL=0
//Terminal hangs up the link
OK
Multi-point Data Transfer Example
AT+MIPCALL=1,"orange","test","test"
OK
+MIPCALL: 172.17.242.86
AT+MIPOPEN=1,1001,"172.17.238.44",1001,0
OK
+MIPOPEN: 1,1
AT+MIPOPEN=2,1111,"172.17.238.44",1111,0
OK
+MIPOPEN: 2,1