PioneerPOS G24-LC Manual De Usuario
April 15, 2008
G24-L AT Commands Reference Manual
A-1
Appendix A: Reference Tables
This appendix contains the following sections:
•
AT Commands Alphabetical Summary, below
•
Character Set Table CS1: (GSM -> UCS-2),
•
Character Set Table CS2: (ASCII <-> UTF-8),
•
Character Set Table CS3: (UCS-2 <-> UTF-8),
•
Character Set Table CS6: (UCS-2 Full Table),
•
Character Set Table CS7: (ASCII table),
Note:
Character Set Table CS6: (UCS-2) is provided on CD due to its size.
AT Commands Alphabetical Summary
The following table contains an alphabetical list of all the G24-L AT commands.
Table A-1: AT Commands (Alphabetical)
AT Command
Description
Page
$
This command displays a list of
all the AT commands supported
by the G24-L.
all the AT commands supported
by the G24-L.
%C
This command is supported for
backward compatibility only, and
has no effect.
backward compatibility only, and
has no effect.
&C
This command determines how
the state of the DCD line relates
to the detection of the received
line signal from the distant end.
the state of the DCD line relates
to the detection of the received
line signal from the distant end.
&D
This command determines how
the G24-L responds when the
DTR (Data Terminal Ready)
status is changed from ON to
OFF during the online data state.
the G24-L responds when the
DTR (Data Terminal Ready)
status is changed from ON to
OFF during the online data state.
&F
This command restores the
factory default configuration
profile.
factory default configuration
profile.