PioneerPOS G24-LC Manual De Usuario

AT commands are sets of commands used for communication with the G24-L cellular modem.

AT commands are comprised of assemblies of ASCII characters which start with the "AT" prefix 
(except the commands A/ and +++). The AT prefix is derived from the word Attention, which 
asks the modem to pay attention to the current request (command).

AT commands are used to request services from the G24-L cellular modem, such as:

Call services: dial, answer and hang up

Cellular utilities: send/receive SMS

Modem profiles: Auto Answer

Cellular Network queries: GSM signal quality

The following syntax definitions apply in this chapter:

Carriage return character, specified by the value of the S3-register.

Line-feed character, specified by the value of the S4-register.

Name enclosed in angle brackets is a syntax element. The brackets themselves do not 
appear in the command line.

Optional sub-parameter of a command or an optional part of terminal information 
response, enclosed in square brackets. The brackets themselves do not appear in the 
command line. When the sub-parameter is not provided in the parameter type 
commands, the new value equals its previous value. In action type commands, the 
action should be performed on the basis of the recommended default setting of the 
sub-parameter.

Denotes a comment, and should not be included in the command.