Manualsbrain.com
  1. Manuales
  2. Marcas
  3. PioneerPOS
  4. G24-LC
  5. Manual De Usuario

PioneerPOS G24-LC Manual De Usuario

Descargar
Página de 444
Chapter 3:  AT Commands Reference
 April 15, 2008
G24-L AT Commands Reference Manual
3-19
RING
AT+CRC=1
//Enable extended ring format
OK
+CRING: REL ASYNC
+CRING: REL ASYNC
ath
AT+CRC=1
OK
//Mobile fax call terminated (multi-numbered scheme) from PSTN 
fax machine
+CRING: ALT Voice/Fax
NO CARRIER
OK
+CLIP, Calling Line Identification 
This command controls the Calling Line Identity (CLI) presentation indication to the terminal 
when an incoming call is detected by the G24-L.
This command allows the user to query the provisioning status of the CLI by the network and by 
the G24-L. The command also allows the user to enable/disable the CLI presentation by the 
G24-L to the terminal.
The +CLIP indication information varies depending on what is provided by the network and what 
information is stored in the G24-L phone book.
+CLIP Indication
When the CLI presentation indication is enabled by the G24-L (<n>=1), this unsolicited 
indication is sent to the terminal after the RING indication.
+CLIP:<number>,<type>[,<subaddr>,<satype>[,[<alpha>][,<CLI validity>]]]
Command 
Type
Syntax
Response/Action
Remarks
Set
AT+CLIP=<n>
OK
+CME ERROR: <err>
The Set command enables or disables 
the presentation of the CLI indication 
from the G24-L to the terminal.
Note:
The Set command does not 
address the network.
Read
AT+CLIP?
+CLIP: <n>, <m>
OK
The Read command returns the +CLIP 
enable/disable state in the G24-L as 
well as in the network provisioning 
state of the CLI presentation.
Test
The Test command returns the Set 
command options (0,1).