Manualsbrain.com
  1. Manuales
  2. Marcas
  3. PioneerPOS
  4. G24-LC
  5. Manual De Usuario

PioneerPOS G24-LC Manual De Usuario

Descargar
Página de 444
Chapter 3:  AT Commands Reference
 April 15, 2008
G24-L AT Commands Reference Manual
3-29
Example
AT+CCFC=?
+CCFC: (0-5)
OK
AT+CCFC=0,3,"01256316830",129,1
OK
AT+CCFC=1,3,"0545658278",129,1 //Register UC forward-to of all classes.
OK
AT+CCFC=1,1
//Activate UC forward-to of all classes.
OK
AT+CCFC=1,2 
//Interrogate reason not-reachable of all classes. 
+CCFC: 1,1,"+97254151200",145
+CCFC: 0,2,"",0
+CCFC: 0,4,"",0
OK 
//For <reason>=3, forward only voice calls is activated.
AT+CCFC=4,2
//Interrogate reason all-call-forwarding for all classes.
+CME ERROR: no network service //Interrogation of <reason>=30 is not supported by network.
AT+CCFC=2,3,"+972545658278"
OK 
AT+CCFC=2,0
//Disable call-forwarding for reason no-reply of all classes.
OK
AT+CCFC=2,2
+CCFC: 0,1,"+972545658278",145,,25
+CCFC: 0,2,"+972545658278",145,,25
+CCFC: 0,4,"+972545658278",145,,25
OK
+CLIR, Calling Line Identification Restriction 
This command instructs the G24-L to query, enable or disable the presentation of the CLI (calling 
line ID) of a MO call to the called party. The restriction of the CLI (disable presentation) is 
dependent both on the G24-L and on the network.
The network enables three possible provisions of CLIR: 
•
Not provisioned (CLIR Off - presentation allowed)
•
Provisioned permanently
•
Provisioned with Temporary mode
The provision is fixed and cannot be changed by an AT command.
Temporary Mode:
Temporary mode can be in one of two states:
•
A - Presentation restricted (CLIR On) as default. 
•
B - Presentation allowed (CLIR Off) as default. A subscriber to Temporary mode always has 
a default subscription to state A or B. Temporary-mode provisioning means that the terminal 
can request the G24-L to switch the default mode from A to B, and vice versa.