GE DEH-210 Manual De Usuario
PMCS Interface Toolkit
Features of Tabular Data Screen Wizards
•
181
The 565 Tabular Data Screen wizard has the following buttons on the Command tab:
Tab
Button
Function
Command
Maint Data
Clears the maintenance data
Operation Data
Clears the operation data
Amp Demand
Clears the amp demand registers
KW Demand
Clears the kW demand registers
KVAR Demand
Clears the kVAR demand registers
Events
Clears the events table
Energy
Clears the energy used data
Reset Keypad
Performs a keypad reset
End of Relay Test
Ends the relay test
End of LED Test
Ends the LED test
End of Analog Output Test
Ends the analog output test
Test LCD Display
Sends a test pattern to the LCD
Test LEDs
Starts the LED test
Table 35. 565 Tabular data screen commands.
The Setup 2 tab has two data input areas. Analog Input Title creates a user label for
the analog input used in the device. Analog Input Units performs the same function
for the units of the analog input. These labels appear on the Metering tab and on the
Large Faceplate wizard when the analog input is displayed. The analog input can be
scaled to display any desired units from the front of the device, but these labels are
not sent to the DDE Server.
the analog input used in the device. Analog Input Units performs the same function
for the units of the analog input. These labels appear on the Metering tab and on the
Large Faceplate wizard when the analog input is displayed. The analog input can be
scaled to display any desired units from the front of the device, but these labels are
not sent to the DDE Server.
For complete explanations of parameters, refer to the 565 Users Guide.