Graco 24B596 Manual De Usuario

Setup 

8.

If the PIN Code you entered is correct, the System 
Setup Screen, shown in F

. 22 displays.

9.

If the PIN Code you entered is incorrect, the digits 
flash. The Code must be re-entered by repeating 
steps 4 and 5.

NOTE: 

•

As soon as any arrow key is pressed, the numerals 
stop flashing.

•

To leave any Setup Screen and return to normal 
operation, press RESET.

1.

Use the UP/DOWN arrows to move the cursor up 
and down through the list of setup screens (F

. 22).

2.

Press ENTER to display the selected setup screen.

3.

When all setup operations are complete, press 
RESET to return to normal operation.

Pump On is the length of time the pump runs before its 
cycle is terminated by either a timer, a specific number 
of cycles or a certain pressure threshold is attained.

1.

Use the UP/DOWN Arrow keys to move the cursor 
over PUMP ON.

2.

Press ENTER to display the PUMP ON setup 
screen.

NOTE: Time is displayed in HH:MM:SS.

1.

Use the Arrow keys to move the cursor over the 
PUMP ON time box.

2.

Press ENTER.

3.

Use the UP/DOWN arrows to move up and down 
through the numbers 0-9 until the first number in the 
PUMP ON time is displayed in the field. 

4.

Use the RIGHT arrow to move the cursor to the next 
field. 

5.

Repeat steps 3 and 4 until the desired time is dis-
played.

6.

Use the Arrow keys to move the cursor over the 
ENDED BY pull-down list.