Cisco Systems Cisco IOS XR Manual De Usuario
4-37
Cisco IOS XR Getting Started Guide
OL-10957-02
Chapter 4 Configuring General Router Features
Managing Configuration Sessions
In the preceding example, the show configuration command displays the target configuration, which
includes the failed configuration.
includes the failed configuration.
Note
The failed configuration is discarded if you exit global configuration mode or administration
configuration mode without recovering the configuration. After recovery, correct and commit the
configuration or save it to a file to avoid losing it.
configuration mode without recovering the configuration. After recovery, correct and commit the
configuration or save it to a file to avoid losing it.
Exiting a Configuration Submode
When you have finished configuration changes in a configuration submode, such as the interface or SDR
configuration submodes, you can return to return to the previous configuration mode and continue
making configuration changes. To exit a configuration submode, enter the exit command, as shown in
the following example:
configuration submodes, you can return to return to the previous configuration mode and continue
making configuration changes. To exit a configuration submode, enter the exit command, as shown in
the following example:
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# interface POS 0/3/0/1
RP/0/RP0/CPU0:router(config-if)# description this is my interface
RP/0/RP0/CPU0:router(config-if)# ipv4 address 10.1.1.1 255.0.0.0
RP/0/RP0/CPU0:router(config-if)# exit
RP/0/RP0/CPU0:router(config)#
Note
If you use the exit command to exit global configuration or administration configuration mode, the
router prompts you to save changes, discard changes, or cancel the action, as described in the next
section.
router prompts you to save changes, discard changes, or cancel the action, as described in the next
section.
Returning Directly to Configuration Mode from a Submode
When you have finished configuration changes in a configuration submode, such as the interface or SDR
configuration submodes, you can skip all intermediate submodes and return to the top-level
configuration mode and continue making configuration changes. To return to configuration mode, enter
the root command, as shown in the following example:
configuration submodes, you can skip all intermediate submodes and return to the top-level
configuration mode and continue making configuration changes. To return to configuration mode, enter
the root command, as shown in the following example:
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# router static
RP/0/RP0/CPU0:router(config-static)# address-family ipv4 unicast
RP/0/RP0/CPU0:router(config-static-afi)# root
RP/0/RP0/CPU0:router(config)#
Ending a Configuration Session
You can use any of the following methods to end a configuration session:
•
Enter the exit command in global configuration or administration configuration mode.
•
Enter the end command in any configuration mode or submode
•
Press Ctrl-Z.
Note
If you enter the exit command in a configuration submode, the command returns you to the parent
configuration level.
configuration level.