Cisco Systems 1000 Series Manual De Usuario

Descargar
Página de 702
 
5-154
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
OL-16506-17
Chapter 5      Software Upgrade Processes Supported by Cisco ASR 1000 Series Routers
  Using ISSU to Perform a Consolidated Package Upgrade in a Dual Route Processor Configuration with MDR
For MDR upgrade using consolidated packages, upgrade is initiated by the upgraded active RP after the 
ESP software has been upgraded. 
Using ISSU to Perform a Consolidated Package Upgrade in a 
Dual Route Processor Configuration with MDR
Consolidated packages can only be upgraded using ISSU in dual Route Processor configurations. ISSU 
is not supported for consolidated package upgrades in single Route Processor configurations.
If you want the RPs on your Cisco ASR 1000 Series router to be running using a consolidated package 
with MDR after the ISSU upgrade is complete, use the following instructions:
Note
This procedure will only work if the current RPs are already running consolidated packages.
SUMMARY STEPS
1.
ip tftp
 
source-interface gigabitethernet slot/port
 
2.
copy tftp: URL-to-target-location
3.
copy source-file-system:filename standby-destination-filesystem
4.
dir URL-to-target-location 
dir URL-to-target-stby-location
5.
issu checkversion rp upgrade-rp-number file URL mdr {force} 
6.
issu loadversion rp upgrade-rp-number file standby-file-system:filename mdr {force}
7.
issu runversion
8.
telnet ip-address port 
9.
issu acceptversion
10.
issu commitversion
11.
show versionshow version active-RP runningshow version active-RP provisioned
show platform
show running-configuration
12.
hw-module slot RP slot number reload