Manualsbrain.com
  1. Manuales
  2. Marcas
  3. Cisco Systems
  4. 1000 Series
  5. Manual De Usuario

Cisco Systems 1000 Series Manual De Usuario

Descargar
Página de 702
 
3-5
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
OL-16506-17
Chapter 3      
  Configuring Persistent Telnet
Configuring Persistent Telnet
This task describes how to configure persistent Telnet on the Cisco ASR 1000 Series Routers.
Prerequisites
For a persistent Telnet connection to access an IOS vty line on the Cisco ASR 1000 Series Router, local 
login authentication must be configured for the vty line (the login command in line configuration mode). 
If local login authentication is not configured, users will not be able to access IOS using a Telnet 
connection into the Management Ethernet interface with an applied transport map. Diagnostic mode will 
still be accessible in this scenario.
SUMMARY STEPS
1.
(Required) enable
2.
(Required) configure terminal
3.
(Required) transport-map type persistent telnet transport-map-name
4.
(Required) connection wait [allow {interruptible} | none {disconnect}] 
5.
(Optional) banner [diagnostic | wait] banner-message
6.
(Required) transport interface GigabitEthernet 0
7.
(Required) exit
8.
(Required) transport type persistent telnet input transport-map-name 
DETAILED STEPS
Command or Action
Purpose
Step 1
enable
Example:
Router> enable
Enables privileged EXEC mode. 
•
Enter your password if prompted.
Step 2
configure
 terminal
Example:
Router# configure terminal
Enters global configuration mode.
Step 3
transport-map type persistent telnet
 
transport-map-name
Example:
Router(config)# transport-map type persistent 
telnet telnethandler
Creates and names a transport map for handling persistent 
Telnet connections, and enters transport map configuration 
mode.