Cisco Systems 1000 Series Manual De Usuario

4-8

Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide

OL-16506-17

Chapter 4 Consolidated Packages and SubPackages Management

Managing and Configuring the Router to Run Using Consolidated Packages and Individual SubPackages

Loading /auto/tftp-users/user/asr1000rp1-adventerprisek9.02.01.00.122-33.XNA.bin from

172.17.16.81 (via GigabitEthernet0):

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!

[OK - 208904396 bytes]

208904396 bytes copied in 330.453 secs (632176 bytes/sec)

Router# dir bootflash:

Directory of bootflash:/

11 drwx 16384 Dec 4 2007 04:32:46 -08:00 lost+found

86401 drwx 4096 Dec 4 2007 06:06:24 -08:00 .ssh

14401 drwx 4096 Dec 4 2007 06:06:36 -08:00 .rollback_timer

28801 drwx 4096 Mar 18 2008 17:31:17 -07:00 .prst_sync

43201 drwx 4096 Dec 4 2007 04:34:45 -08:00 .installer

12 -rw- 208904396 May 28 2008 16:17:34 -07:00

asr1000rp1-adventerprisek9.02.01.00.122-33.XNA.bin

13 -rw- 45977 Apr 9 2008 16:48:46 -07:00 target_support_output.tgz.tgz

928862208 bytes total (503156736 bytes free)

Router# config t

Enter configuration commands, one per line. End with CNTL/Z.

Router(config)#boot system flash

bootflash:asr1000rp1-adventerprisek9.02.01.00.122-33.XNA.bin

Router(config)#config-reg 0x2102

Router(config)#exit

Router#show run | include boot

boot-start-marker

boot system flash bootflash:asr1000rp1-adventerprisek9.02.01.00.122-33.XNA.bin

boot-end-marker

Router# copy run start

Destination filename [startup-config]?

Building configuration...

[OK]

Router# reload

Managing and Configuring a Consolidated Package Using the request platform software package
install Command

In the following example, the request platform software package install command is used to upgrade
a consolidated package running on RP 0. The force option, which forces the upgrade past any prompt
(such as already having the same consolidated package installed), is used in this example.

Router# request platform software package install rp 0 file

bootflash:asr1000rp1-adventerprisek9.02.01.00.122-33.XNA.bin force

--- Starting installation state synchronization ---

Finished installation state synchronization

--- Starting file path checking ---

Finished file path checking

--- Starting image file verification ---

Checking image file names

Verifying image file locations