Cisco Systems 1000 Series Manual De Usuario

To map a virtual network identifier to a bridge domain, use the member vni command in bridge-domain 
configuration mode.   To remove the VNI from the bridge domain, use the no form of this command.

member vni vni-id

no member vni vni-id

Bridge-domain configuration (config-bdomain)

The following example map a virtual network identifier to a bridge domain:

Router(config)# bridge-domain 10

Router(config-bdomain)# member vni 1010

The VNI number to be mapped to the bridge domain.

Cisco IOS XE Release 3.11S

This command was introduced on the Cisco ASR 1000 Series 
Routers.

Binds a bridge domain to the service instance.