Cisco Systems 1000 Series Manual De Usuario

If you install the Cisco WebEx Node for ASR 1000 Series SPA before the software subpackage is 
installed, you will receive the error message %ASR1000_RP_SPA-3-MISSING_SPA_PKG_ERR. This 
message will resolve once you download and install the appropriate sipspawma subpackage and then 
reload the router in individual subpackage mode.

To run the router using an optional subpackage, perform the following steps for each RP in the system:

Verify that the RP is running in individual subpackage mode and was booted from a provisioning file. 
For more information, see the 

.

Verify that the version of the optional subpackage that you want to install is the same version as the 
software running on the active RP.

Download the optional subpackage that you want to install. Optional subpackages must be downloaded 
independently from consolidated packages for the Cisco ASR 1000 Series Routers.

On each RP, copy the optional subpackage to the directory where any other individual subpackages and 
the provisioning file is located.

Run the request platform software package install rp file command, as shown in the following 
example.

Do not use the optional slot or bay keywords for the initial installation.

Router# request platform software package install rp 0 file 

--- Starting local lock acquisition on R0 --- Finished local lock acquisition on R0

--- Starting file path checking ---

Finished file path checking

--- Starting image file verification --- Checking image file names Verifying image file 

locations Locating image files and validating name syntax

   Found asr1000rp1-

sipspawmak9.BLD_V122_33_XND_ASR_RLS4_THROTTLE_LATEST_20090511_042308.pkg

Inspecting image file types

Processing image file constraints

Creating candidate provisioning file

WARNING: No package of type sipspawmak9 is installed.

WARNING: Package will be installed for all SIP slots and bays.

Finished image file verification

--- Starting candidate package set construction --- Verifying existing software set 

Processing candidate provisioning file Constructing working set for candidate package set 

Constructing working set for running package set Checking command output Constructing 

merge of running and candidate packages Checking if resulting candidate package set would 

be complete Finished candidate package set construction

--- Starting compatibility testing ---

Determining whether candidate package set is compatible