Manualsbrain.com
  1. Manuales
  2. Marcas
  3. Cisco Systems
  4. 1000 Series
  5. Manual De Usuario

Cisco Systems 1000 Series Manual De Usuario

Descargar
Página de 702
 
5-14
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
OL-16506-17
Chapter 5      Software Upgrade Processes Supported by Cisco ASR 1000 Series Routers
  ISSU Upgrade for Redundant Platforms
Using ISSU to Upgrade the Subpackages on a Cisco ASR 1006 or ASR 1013 Router (issu Command Set)
This section provides the instructions for performing an ISSU upgrade using subpackages on a Cisco 
ASR 1006 router or ASR 1013 router with a dual RP setup using the issu command set.
This procedure can only be performed if the current ASR 1006 or ASR 1013 routers have two active RPs 
and both RPs are running subpackages.
SUMMARY STEPS
1.
show version
show version active-rp installed
dir filesystem:<directory>
show platform
show redundancy-states
2.
copy running-config startup-config
3.
mkdir URL-to-directory-name
4.
ip tftp
 
source-interface gigabitethernet port
5.
copy tftp: URL-to-target-location
6.
request platform software package expand file URL-to-consolidated-package
7.
dir URL-to-consolidated-package
8.
copy file-system:asr1000rp2-espbase.version.pkg URL-to-directory-of-sub-packages-active-RP
copy file-system:asr1000rp2-espx86base.version.pkg 
URL-to-directory-of-sub-packages-active-RP
copy file-system:asr1000rp2-rpaccess.version.pkg URL-to-directory-of-sub-packages-active-RP
copy file-system:asr1000rp2-rpbase.version.pkg URL-to-directory-of-sub-packages-active-RP
copy file-system:asr1000rp2-rpcontrol.version.pkg URL-to-directory-of-sub-packages-active-RP
copy file-system:asr1000rp2-rpios.version.pkg URL-to-directory-of-sub-packages-active-RP
copy file-system:asr1000rp2-sipbase.version.pkg URL-to-directory-of-sub-packages-active-RP
copy file-system:asr1000rp2-sipspa.version.pkg URL-to-directory-of-sub-packages-active-RP
copy file-system:asr1000rp2-elcbase.version.pkg URL-to-directory-of-sub-packages-active-RP
copy file-system:asr1000rp2-elcspa.version.pkg URL-to-directory-of-sub-packages-active-RP
Note
In step 8, each individual subpackage that was extracted in step 6 is copied to the directory where 
the subpackages that are currently running the active RP are stored.
9.
copy file-system:asr1000rp2-espbase.version.pkg URL-to-directory-of-sub-packages-standby-RP
copy file-system:asr1000rp2-esps86base.version.pkg 
URL-to-directory-of-sub-packages-standby-RP
copy file-system:asr1000rp2-rpaccess.version.pkg URL-to-directory-of-sub-packages-standby-RP
copy file-system:asr1000rp2-rpbase.version.pkg URL-to-directory-of-sub-packages-standby-RP
copy file-system:asr1000rp2-rpcontrol.version.pkg 
URL-to-directory-of-sub-packages-standby-RP