Siemens SS2524 Manual De Usuario
SpeedStream Powerline Wireless Router User Guide
78
The default value is 1.
Buttons
Save
Save the RIP setting. This has no effect on the Static Routing Table.
Add
Add a new entry to the Static Routing table, using the data shown in
the "Properties" area on screen. The entry selected in the list is
ignored, and has no effect.
the "Properties" area on screen. The entry selected in the list is
ignored, and has no effect.
Update
Update the current Static Routing Table entry, using the data shown
in the "Properties" area on screen.
in the "Properties" area on screen.
Delete
Delete the current Static Routing Table entry.
Clear Form
Clear all data from the "Properties" area, ready for input of a new
entry for the Static Routing table.
entry for the Static Routing table.
Generate Report
Generate a read-only list of all entries in the Static Routing table.
Configuring Other Routers on your LAN
It is essential that all IP packets for devices not on the local LAN be passed to the Speed-
Stream Powerline Wireless Router, so that they can be forwarded to the external LAN, WAN,
or Internet. To achieve this, the local LAN must be configured to use the SpeedStream Power-
line Wireless Router as the Default Route or Default Gateway.
Stream Powerline Wireless Router, so that they can be forwarded to the external LAN, WAN,
or Internet. To achieve this, the local LAN must be configured to use the SpeedStream Power-
line Wireless Router as the Default Route or Default Gateway.
Local Router
The local router is the Router installed on the same LAN segment as the SpeedStream Power-
line Wireless Router. This router requires that the Default Route is the SpeedStream
Powerline Wireless Router itself. Typically, routers have a special entry for the Default Route.
It should be configured as follows.
line Wireless Router. This router requires that the Default Route is the SpeedStream
Powerline Wireless Router itself. Typically, routers have a special entry for the Default Route.
It should be configured as follows.
Destination IP Address
Normally 0.0.0.0, but check your router documentation.
Network Mask
Normally 0.0.0.0, but check your router documentation.
Gateway IP Address
The IP Address of the SpeedStream Powerline Wireless
Router.
Router.
Metric
1
Other Routers on the Local LAN
Other routers on the local LAN must use the SpeedStream Powerline Wireless Router's Local
Router as the Default Route. The entries will be the same as the SpeedStream Powerline
Wireless Router's local router, with the exception of the Gateway IP Address.
Router as the Default Route. The entries will be the same as the SpeedStream Powerline
Wireless Router's local router, with the exception of the Gateway IP Address.
•
For a router with a direct connection to the SpeedStream Powerline Wireless Router's
local Router, the Gateway IP Address is the address of the SpeedStream Powerline Wire-
less Router's local router.
less Router's local router.
•
For routers that must forward packets to another router before reaching the SpeedStream
Powerline Wireless Router's local router, the Gateway IP Address is the address of the in-
termediate router.
termediate router.