Manualsbrain.com
  1. Manuales
  2. Marcas
  3. Siemens
  4. S223
  5. Manual De Usuario

Siemens S223 Manual De Usuario

Descargar
Página de 381
User Manual                                                                               UMN:CLI 
SURPASS hiD 6615 S223/S323 R1.5 
A50010-Y3-C150-2-7619                                                                         279 
ing and PIM-SM should be configured at the same time. 
hiX 5430
More than  one port 
on same interface
Layer 3 Network
Multicast Server
PIM-SM
Set-top Box
Set-top Box
Multicast data
IGMP Join/Leave 
message
IGMP Snooping
 
Fig. 9.3 
IGMP Snooping and PIM-SM Configuration Network 
 
9.1 
Multicast Routing Information Base 
In this chapter, you can configure the common multicast commands for multicast routing 
information base. 
 
9.1.1 Enabling 
Multicast Routing (Required) 
To provide multicast service on the hiD 6615 S323, you should use the ip multicast-
routing
 command necessarily. If you disable the multicast routing, the multicast protocol 
daemon remains present, but does not perform multicast functions. 
Enable the multicast routing function, using the following command. 
Command Mode 
Description 
ip multicast-routing 
Enables multicast routing function. 
no ip multicast-routing 
Global 
Disables multicast routing function. (default) 
 
9.1.2 
Limitation of MRIB Routing Entry 
You can limit the number of multicast routes that can be added to a switch, and generate 
an error message when the limit is exceeded. 
To configure the limitation of MRIB routing entry, use the following command. 
 
 
Command Mode 
Description 
ip multicast route-limit
  LIMIT 
[THRESHOLD] 
Enables multicast routing function. 
LIMIT: 1-214783647 (number of routes) 
THRESHOLD: 1-214783647 
no ip multicast route-limit 
Global 
Disables the limitation configuration of MRIB routing 
entry.