Enterasys Networks 1H582-xx Manual De Usuario
Spanning Tree Configuration Command Set
Reviewing and Setting Spanning Tree Port Parameters
6-48
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the span guard function status:
6.2.2.15 set spantree spanguard
Use this command to enable or disable the Spanning Tree span guard function. When enabled, this
prevents an unauthorized bridge from becoming part of the active Spanning Tree topology. It does
this by disabling a port that receives a BPDU when that port has been defined as an edge (user) port
(as described in
prevents an unauthorized bridge from becoming part of the active Spanning Tree topology. It does
this by disabling a port that receives a BPDU when that port has been defined as an edge (user) port
(as described in
). This port will remain disabled until the amount of time defined
by the set spantree spanguardtimeout (
) has passed since the last seen BPDU or
set spantree spanguard {enable | disable}
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Matrix>show spantree spanguard
spanguard is currently disabled.
enable | disable
Enables or disables the span guard function.