GarrettCom 6K32F Manual De Usuario

Magnum 6K32F/FR/FC/FRC Managed Switch Installation and User Guide (05/08) 

modular slot. Since the Magnum 6K32F Series Switches have dual-speed 

capability for copper ports, the 6 or 8-port interfaces are designed to support all 

standard Ethernet media types at 10 or 100Mps speed.  Each 6K32F PM can 

provide two, four, six or eight ports for connecting Ethernet segments with its 

individual connector type and media. 

For a list of 6K32F Series Port Module types, refer to Section 1.2 

  

Each 6K PM is individually described in the following sections. 

NOTE: The port #1 on the RJ-45 ports on all the modules, either all 

RJ-45 ports or used for COMBO module is set as (=) as other ports. 

 

 The 

Magnum 

6KP6-RJMST is a combo 6 

port module of RJ-45’s at 

10/100Mbps and fiber optic 

ports at 100MB. The Combo 

module is equipped with 

dual-mode ST-type 

connectors and dual speed 

copper ports. The ST-

connector functions as a f

optic transceiver to sup

100BASE-FX network 

segments. When installed in a Magnum 6K32F Series Managed Switch, the copper port 

supports the standard distance 100m on each port and the fiber port supports fiber optic 

cable distances up the IEEE-standard 100Mb

iber 

port 

ps distance limits, i.e., typically 2km at full-

duplex an

  

he 

10/100 LED indicates the speed, if the LED is ON 100Mbps if it is OFF 10Mbps. 

0Mb 

T-

d 412m at half-duplex. 

Each port has an Activity (ACT) LED indicating packets being received, a 

Link (LK) LED that indicates proper connectivity with the remote device when lit, and

FDX/HDX LED to indicate full-duplex mode when lit (or half-duplex when off). T

 

The 6KP6-RJ10ST is a six port combo module that looks similar to the 10

combo module with the exception of 10Mb speed at the ST fiber module.  The S

 

48 

.

.