GarrettCom 6K32F Manual De Usuario

Magnum 6K32F/FR/FC/FRC Managed Switch Installation and User Guide (05/08) 

 

51 

.

.

functions in one module of the 6K32F Series Switch supporting four Copper and two 

single-m

s 

-mode and cable lengths can be as 

much as 

 a 

 The 

e 6KP6-RJMSC, the label 

Sgl. M.” is at the top of the faceplate of the 6KP6-RJSSC.   

ode fiber network segments.  

The 6KP6-RJSSC, when installed in a Magnum 6K32F Series Switch operate

on copper at the 100m distance.  The Fiber is single

25+ Km (see Power Budget, Section 4.5) 

Each port has an Activity (ACT) LED indicating packets being received, a 

Link (LK) LED that indicates proper connectivity with the remote device when lit, and

FDX/HDX LED to indicate full-duplex mode when lit (or half-duplex when off).

10/100 LED indicates 100Mbps speed when lit and 10Mbps speed when off. To 

distinguish the single-mode 6KP6-RJSSC from the multi-mod

“
 

s, 

supportin

 

 

-mode fiber cable 

lengths o

copper port, which is 100Mbps when the LED is 

ON and 10 Mb when the LED is OFF.  

 

The Magnum 6KP6-RJSSC is also a Combo module equipped with 4 dual 

speed copper ports and 2 Single-mode (Long Reach) SC-type connectors. It provides a 

combination of copper and Fiber functions in one module to the 6K32F Series Switche

g four Copper and two single-mode (Long-Reach) fiber network segments. 

The 6KP6-RJSSC, when installed in a Magnum 6K32F Series Switch has

copper supporting the 100m distance and Fiber supporting single

f as much as 40+ Km (see Power Budget, Section 4.5) 

Each port has an Activity (ACT) LED indicating packets being received, a 

Link (LK) LED indicating proper connectivity with the remote device when lit, and a 

FDX/HDX LED indicating full-duplex mode when lit (or half-duplex when off). The 

10/100 LED indicates the speed for the 

 

 Series Switches, 

supportin

ch port 

F
  
The Magnum 6KP6-RJ10ST is also a Combo module equipped with 4 dual

speed copper ports and 2 multi-mode 10 Mb fiber ST-type connectors. It provides a 

combination of copper and Fiber functions in one module to the 6K32F

g four Copper and two 10Mb of ST fiber network segments.  

The 6KP6-RJ10ST, when installed in a Magnum 6K32F Series Switch has 

copper supporting the 100m distance and Fiber supporting the multi-mode fiber cable.   

This allows it to connect the legacy network 10Mb requirement in the network. Ea

has an Activity (ACT) LED indicating packets being received, a Link (LK) LED