Cisco Systems 566 Manual De Usuario
3-13
Cisco Content Engine 511 and 566 Hardware Installation Guide
OL-5756-01
Chapter 3 Installing the Content Engine
Connecting Power and Booting the System
Figure 3-9
CE-511 and CE-566 Back Panel Ports and Receptacles
Note
Cisco ACNS software does not support the use of a keyboard or mouse (PS/2 or
USB) with the Content Engine. However, keyboard and mouse are supported by
the BIOS for power-on self-test (POST), and the configuration/setup utility.
USB) with the Content Engine. However, keyboard and mouse are supported by
the BIOS for power-on self-test (POST), and the configuration/setup utility.
Connecting Power and Booting the System
Follow these steps to connect power to the Content Engine:
Step 1
Review the information in the
.
Step 2
.)
Step 3
Connect the other end of the power cord to a power source at your installation site.
1
AC power receptacle
2
Mouse connector
3
Keyboard connector
4
Ethernet 1 receptacle
5
Ethernet 2 receptacle
6
USB ports (not supported)
7
Video connector
8
Serial connector
115773
1
2
3
4
8
7
5
6