Cisco Systems 511 Manual De Usuario

If the chassis was dropped or damaged while being moved, you should check the 
system to see if it functions properly. If an external device attached to the system 
is dropped or damaged, contact your service representative for instructions. (See 
the 

.)

No. Go to 

.

Perform the steps in the 

Is the problem resolved?

Yes. The power to the system was faulty, or the connections to the system were 
loose. You have fixed the problem.

No. Go to 

.

Verify the settings in the system setup program. For details, see the software 
configuration guide that shipped with your system.

Did the system complete the boot routine?

Yes. The system configuration information was incorrect. You have fixed the 
problem.

No. Call your service representative. (See the 

Improperly set switches and controls and loose or improperly connected cables 
are the most likely source of problems for the chassis or other external equipment. 
A quick check of all the switches, controls, and cable connections can easily 
solve these problems. (See 

Figure 1-5 

and 

 for the location of front 

panel controls and indicators. See 

 for the location of back panel 

connections on the system.)