Compaq EP7150 Manual De Usuario

2

English

 Warning-    Do not look into the projector’s lens when the lamp is 

on.  The bright light may hurt your eyes.

 Warning-  To reduce the risk of fi re or electric shock, do not expose 

this product to rain or moisture.

 Warning-  Please do not open or disassemble the product as this 

may cause electric shock.

 Warning-  When changing the lamp, please allow unit to cool 

down, and follow all changing instructions.

 Warning-  This product will detect the life of the lamp itself.  

Please be sure to change the lamp when it shows warn-

ing messages.

 Warning-  Reset the “Lamp Reset” function from the On Screen 

Display “Lamp Setting” menu after replacing the lamp 

module (refer to page 27).

 Warning-  When switching the projector off, please ensure the 

projector completes its cooling cycle before disconnect-

ing power.

 Warning-  Turn on the projector fi rst and then the signal sources.

 Warning-  Do not use lens cap when projector is in operation.

 Warning-  When the lamp reaches the end of its life, it will burn 

out and may make a loud popping sound.  If this hap-

pens, the projector will not turn back on until the lamp 

module has been replaced. To replace the lamp, follow 

the procedures listed under “Replacing the Lamp”. (see 

page 32)