Compaq EP7150 Manual De Usuario

32

English

The projector keeps track of the lamp usage.  It will show you a 

warning message 

When you see this message, change the lamp as soon as pos-

sible. Make sure the projector has cooled down for at least 30 

minutes before changing the lamp. 

Warning: Lamp 

compartment is hot!  

Allow 30 minutes 

to cool down before 

changing lamp!

Warning: To 

reduce the risk of 

personal injury, do not 

drop the lamp module 

or touch the lamp bulb. 

The bulb may shatter 

and cause injury if it is 

dropped.

1.  Switch off the power to the projector by pressing the Power 

button.

2.  Allow the projector to cool down for at least 30 minutes.
3.  Disconnect the power cord.
4.  Use a screwdriver to remove the screws from the cover.
5.  Push up and remove the cover.
6.  Remove the 2 screws from the lamp module.
7.   Pull out the lamp module.
To replace the lamp module, reverse the previous steps.