Casio MA1003-B Manual De Usuario

Wireless Connection 3 is 
running on my computer, 
but the Projector List 
dialog box won’t display.

 Make sure all of the projectors are turned on. A 

projector can be recognized by a computer even if 
“Wireless” is not selected as the projector’s input 
source.

–

 Make sure that all of the projectors have wireless 

adapters installed (page 40).

 If the projectors and computer are far away from each 

other or if there is wall or some other physical 
impediment between them, move them closer and/or 
remove the impediment.

 If a nearby microwave oven, Bluetooth device, or other 

device is interfering with the wireless LAN signal, 
relocate the interfering device.

The SSID of the projector 
I want to connect to is 
not included on the 
Projector List dialog box.

 Check the “SSID Broadcast” setting of the projector. If 

“Disable” is selected, change the setting to “Enable”.

“To configure projector 
network settings and 
wireless LAN connection 
settings” (page 34)

 If the projector is off, turn it on.

Even though entering the 
login code displayed on 
the Wireless standby 
screen, I get a “Could not 
connect to projector. 
Connection has been 
terminated.” error.

 If there are two or three projectors, make sure that 

each one has a different SSID: casiolpj_default1, 
casiolpj_default2, casiolpj_default3.

“To change the default 
SSID of a projector” 
(page 16)

 If there are more than three projectors, assign each 

one a unique SSID. In this case you can use the 
default SSIDs for three of the projectors and configure 
security settings for the remainder of the projectors to 
assign original SSIDs.

“To configure security 
settings” (page 21)