Crestron electronic CP-X3014WN/ Manual De Usuario

11

1. Connection to the network

1.4 Manual network connection setting - Wireless LAN -

Using the designated USB wireless adapter (option) on the projector enables the 
projector and computer to communicate in both the Ad-Hoc and Infrastructure 
modes. 
This section is intended to explain how to set up wireless LAN connection 
manually.

1.4.1 Preparation for wireless LAN connection

First, insert the USB wireless adapter into the USB TYPE A port. (

 Connecting 

with your devices in the Operating Guide) 
Then, set up the computer for wireless communication.
When the computer comes with a built-in IEEE802.11b/g/n wireless LAN device, 
enable it and disable other network connections. If a wireless LAN device is not 
built into the computer, connect an IEEE802.11b/g/n wireless LAN device and 
install the device driver. (For details, refer to the user's guide for the computer and 
wireless LAN device.)

*  Ad-Hoc is one of the wireless LAN communication methods without having 

access point to communicate.

*  Infrastructure is one of the wireless LAN communication methods with having 

access point to communicate. If certain quantities of equipments are used, this 
mode is efficient.  
If communicating with existing network, consult to your network administrator.

Fig. 1.4.1.a Without an access point communication (Ad-Hoc)

Fig. 1.4.1.b With an access point communication (Infrastructure)