Crestron electronic CP-X4014WN Manual De Usuario

16

You can adjust or control the projector via a network from a web browser on a 
computer that is connected to the same network.

• Internet Explorer

®

 6.0 or later is required.

• If JavaScript

®

 is disabled in your web browser configuration, you must enable 

JavaScript

®

 in order to use the projector web pages properly. See the Help files 

for your web browser for details on how to enable JavaScript

®

.

• It is recommended that all web browser updates are installed. 
• If data is transferred via wireless and wired LAN at the same time, the projector 
may not be able to process the data correctly.

NOTE

3. Web Control

3. Web Control

Refer to the following for configuring or controlling the projector via a web browser. 
Make sure that your computer and the projector is connected via network, and 
then start Web browser. 
Enter the projector's IP address into URL input box of the Web browser as the 
example below, and then press the Enter key or 

 button.

Example:  If the IP address of the projector is set to 192.168.1.10: 

Enter “http://192.168.1.10/” into the address bar of the web browser 
and press the Enter key or click 

 button.

If a correct URL is input, and the projector 
and your computer are connected to the 
same network correctly, the selection 
window as shown on the right will be 
displayed.
You can choose to use the Projector 
Web Control or Crestron e-Control

®

 as 

a tool for controlling the projector. Click 
one of them. 
For more details, refer to 3.1 Projector 
Web Control (

17) or 3.2 Crestron 

 (

42).

• If Crestron e-Control in the Network Settings (

21) is set to 

Disable, the selection window above does not appear, but the Logon window of 
the Projector Web Control is displayed.
• Crestron e-Control

®

 is created using Flash

®

. You need to install the Adobe

®

 

Flash

®

 Player on your computer to use Crestron e-Control

®

.

NOTE