Compaq 5525B Manual De Usuario
Chapter 4
HOST INTERFACE
120
IEEE 1284 Parallel (Bidirectional) Submenu
The IEEE
®
1284 interface supports bidirectional communication.
Configuration of this interface is controlled from the host.
Prime Signal
•
Enable. The parallel port will perform a warm start (reboot) if the
host asserts the Prime Signal.
host asserts the Prime Signal.
•
Disable. The parallel port will not perform a warm start (reboot) if
the host asserts the Prime Signal.
the host asserts the Prime Signal.
TOF Action
•
Reset. A form feed is performed before a warm start when the
prime signal is asserted from the host. This setting is used only if
the Prime Signal parameter is enabled.
prime signal is asserted from the host. This setting is used only if
the Prime Signal parameter is enabled.
•
Do Nothing. Nothing occurs before a warm start when the prime
signal is asserted from the host.
signal is asserted from the host.
Buffer Size in K
This option configures the amount of memory allocated for the IEEE
1284 parallel port buffer. You can specify between 1 and 16 Kbytes, in
1-Kbyte increments.
1284 parallel port buffer. You can specify between 1 and 16 Kbytes, in
1-Kbyte increments.
IEEE 1284
(from
)
Prime Signal
TOF Action
Buffer Size in
K
Enable*
Disable
Disable
Reset*
Do Nothing
Do Nothing
1*
(1-16)
(1-16)
* = Factory Default