Manualsbrain.com
  1. Manuales
  2. Marcas
  3. Cognitive Solutions
  4. A799
  5. Manual De Usuario

Cognitive Solutions A799 Manual De Usuario

Descargar
Página de 142
Chapter 4: Programming Commands
120
Revision D 12/09
A799-PG00001D
Setting the Gateway
ASCII 
US  BS  ETX  n1  n2 n3  n4 
Hexadecimal  1F  08  03  n1  n2 n3  n4 
Decimal  
31  8  3 
n1  n2 n3  n4 
Default:  
none
Sets the printer to the gateway having the IP address value specified by the values n1 to n4. A gateway, even when the 
printer is on another subnet, is not always needed. 
The printer initiates no connection and obtains the gateway address from the host packets.
Setting raw TCPIP port 9001
ASCII 
US  BS  EOT  n1  n2  n3  n4 
Hexadecimal  1F  08  04  n1  n2  n3  n4 
Decimal 
31  8  4 
n1  n2  n3  n4
n1 = 0: 
disabled 
n1 = 1: 
enabled
Default:  
enabled
Sets the port where the printer will look for raw tcpip communications.
LP Daemon
ASCII 
US  BS  ENQ  n1 
Hexadecimal  1F  08  05  n1 
Decimal 
31  8  5 
n1
n1 = 0:  
disabled 
n1 = 1: 
enabled
Default:  
disabled
Enables or disables the printer LP Daemon.   The LP listens on port 515.
Telnet Daemon
ASCII 
US  BS  ACK  n1 
Hexadecimal  1F  08  06  n1 
Decimal 
31  8  6 
n1
n1 = 0: 
disabled 
n1 = 1: 
enabled
Default:  
enabled
Enables or disables the printer Telnet server.   The Telnet server listens on port 23.
BootP
ASCII 
US  BS  BELL  n1 
Hexadecimal  1F  08  07 
n1 
Decimal 
31  8  7 
n1
n1 = 0: 
disabled 
n1 = 1: 
enabled
Default:  
disabled
Enables or disables the use of BootP at power-up to obtain an IP address.  BootP is a subset of DHCP.