Cognitive Solutions A799 Manual De Usuario

Chapter 4: Programming Commands

 57

Revision D 12/09

A799-PG00001D

ESC G n 

Hexadecimal  1B 47 n 

27 71 n

Value of n: 

0 = Off 

1 = On

 

(When 0 and 1 are the least significant bit, LSB)

Default: 

0 (Off)

Turns double-strike mode on or off. Identical to emphasized mode. The printer is reset to the standard print mode after a 
clear printer (0x10) command is received.

Only the lowest bit of n is effective. The settings do not apply in page mode. However they can be set or cleared in page 
mode.
Double-strike printing cannot be used with bit-images or downloaded bit-images.

This command and the select print mode(s) command (1B 21) function identically. They should have the same setting 
when used together.
In A793 emulation, this command is unrecognized and the parameter byte is put into the print buffer.

ASCII 

ESC I n 

Hexadecimal  1B 49 n 

Decimal 

27 73 n

Value of n: 

0 = Off 

 

1 = On

 

(When 0 and 1 are the least significant bit, LSB)

Default: 

0 (Off)

Turns italic print mode on or off. The printer is reset to the standard print mode after a clear printer (0x10) command is 
received.

Only the lowest bit of n is valid.

This command is recognized in A799 native mode and A794 emulation.
In A793 and LEGACY emulations, the parameter byte is put into the buffer.