Lexmark 350d Manual De Usuario

Install the new toner cartridge by aligning the white rollers on the toner cartridge with the white arrows on the 
tracks of the photoconductor and pushing the toner cartridge in as far as it will go. The toner cartridge clicks into 
place when correctly installed.

Close the front door.

Turn the printer back on.

To ensure print quality and to avoid damage to the printer, the printer stops operating after the photoconductor kit has 
reached a maximum of 110% of its life. The message 

 is displayed when the printer reaches 

this point. If the Toner Alarm setting is set to Single or Continuous (default is Off), the printer automatically notifies you 
before the photoconductor kit reaches this point and displays the message 

. To avoid 

having the printer stop operating, replace the photoconductor kit when you first receive the 

 message. While the printer may continue to function properly after the photoconductor kit has reached its official 

end-of-life (approximately 30,000 pages), print quality begins to significantly decrease until the photoconductor stops 
operating at the maximum of 110% of its life. Once the photoconductor kit has been replaced, and the counter has been 
reset, normal printer operation resumes. For more information, see the instruction sheet that came with your 
photoconductor kit.

When the 

 message appears, you should order a new photoconductor kit. You can print 

a few hundred pages after the 

 message appears.